Flight Simulator Controls and Their Indicators

Before practicing any skill in real life, it is important to learn the skills required for it and then practice the skills in an artificial and controlled environment before moving on to the real thing. Similarly, before you head out to fly an actual airplane. You can find the best flight simulator controls to learn about aircraft flying before you try to fly the actual thing there are many flight simulator controls that you can choose from, some including controls like the Flight Pro Sim. This particular simulator has around 100 different aircraft model controls in it and you will need to practice all of them to learn about controls of different air crafts.

Users of different flight simulator controls have the option of choosing either 2 dimensional or three-dimensional cockpits to practice flying in. A lot of trainees have suggested that the three-dimensional cockpits give you a more real experience. However, depending on your level of comfort, you can switch between these two views at any point in time. The controls can be used through a yoke, mouse or even a joystick, depending on what you have and what is available for you to use.

There are indicators that come with the flight simulator controls that teach you about reading gauges in the cockpit in real life. You will learn how to use the attitude indicators to find out about the bank and pitch of the plane, while learning about speeds (in knots through reading the airspeed indicator in the control panel.
Air speed indicators, in real life and in the flight control simulator have different colored arcs representing speed range, flaps and retracted flaps. The red dial, which is on the upper section of the indicator, is very important to keep a check on. It indicates the velocity that must not be exceeded so you will need to be very careful about this and keep a check on it from time to time.

Aligning the wings with the turn indicator marks suggests that you will be taking a regular 120 seconds turn. In order to check whether the rudder and ailerons are aligned correctly, you will need to refer to the inclinometer. This will tell you about the skidding of the plane. The altimeter in the flight simulator controls tells you about your altitude measured in hundreds of feet. This is always measured as the number of feet above sea level and not ground level so it is important to remember this. The vertical speed indicator in the cockpit will inform you about the rate at which your plane is ascending or descending.

For more information regarding flight simulator controls you can contact Flying City for more information and purchase of the controls themselves.

By Aisha A Rahman 

Article Source: http://EzineArticles.com/?expert=Aisha_A_Rahman